Fabtech Develops 4inch Budget Suspension for Full-Size Fords

To enhance Fabtech’s extensive line of Super Duty suspension systems, they developed an entry level 4″ Budget System. The 4″ Budget System utilizes the factory front coil springs with a steel upper spacer providing 4″ of lift. Radius Arm drop brackets retain the factory arms with correct caster setting for the increase ride height. System includes a Trac Bar relocation bracket that has been designed to center the axle under the vehicle and still works properly with the factory Pitman Arm. This eliminates the need to replace the Pitman Arm resulting in a lower cost and faster installation time. Rear lift is accomplished with lift blocks and extended length u-bolts.

Here’s what a typical 4″ kit looks like on a Ford F250:

System allows installation of 35″ tall tires with required inner fenderwell trimming for adequate tire clearance for street driving and light offroad use. Here are a few links to help you in your search for a 4″ kit for the Ford:
2008-11 Ford F-250
2008-11 Ford F-350
2011 Ford F-450/F-550
2008-10 Ford F-450/F-550

SoCal SAYS: Not everyone out there can afford to spend $10,000 on lifting their truck, so by offering a suspension lift that costs around $1,000, Fabtech is helping the guy who wants an affordable lifted truck. There’s nothing wrong with a 4″ lift on 35″ tires that you drive to work everyday or use to tow your boat. Thanks Fabtech for helping out the every day driver.